1. Clean Surface
Use a household cleaner, isopropyl alcohol, or Fixture Shield Pre-Cleaner to thoroughly clean the surface.
2. Apply the Shield
Spray a fine mist on the surface and wipe it with the included microfiber towel in straight lines.
3. Buff to Shine
Immediately buff the surface to remove any residue, achieving a smooth, streak-free finish.
4. Allow to Cure
Let the coating cure for 2 hours before using the surface. Full curing takes 24 hours.
Tip: For stainless steel, wipe with the grain and buff with the dry side of the towel for a perfect shine.
Tips & Tricks
- Thorough Preparation: Ensure the surface is clean for best results. Use isopropyl alcohol or Fixture Shield Primer for optimal adhesion.
- Polish Metals: Lightly polish metal surfaces, like stainless-steel sinks, before applying the coating for enhanced adhesion.
By following these instructions and tips, you'll ensure the best performance and durability from your Fixture Shield application.