How to Apply Fixture Shield Home Ceramic Coating

Achieve long-lasting protection for your kitchen and bath surfaces with Fixture Shield by following these steps:

1. Clean Surface

Use a household cleaner, isopropyl alcohol, or Fixture Shield Pre-Cleaner to thoroughly clean the surface.

2. Apply the Fixture Shield

Spray a fine mist on the surface and wipe it with the included microfiber towel in straight lines.

3. Buff to Shine

Immediately buff the surface to remove any residue, achieving a smooth, streak-free finish.

4. Allow to Cure

Let the coating cure for 2 hours before using the surface. Full curing takes 24 hours.

Tip: For stainless steel, wipe with the grain and buff with the dry side of the towel for a perfect shine.

Tips & Tricks

• Thorough Preparation: Ensure the surface is clean for best results. Use isopropyl alcohol or Fixture Shield Primer for optimal adhesion.
• Polish Metals: Lightly polish metal surfaces, like stainless-steel sinks, before applying the coating for enhanced adhesion.
• Stainless Steel Care: When applying to stainless steel, wipe with the grain and buff with the dry side of the towel for a perfect shine.

By following these instructions and tips, you'll ensure the best performance and durability from your Fixture Shield home ceramic coating application.